Blog

Is it mold on my sourdough starter? How to tell, and what's harmless

Fuzzy spots, a white film, a gray crust, crusty bits on the jar: how to tell mold from the harmless things that look like it, and what to do if it really is mold.

Aiden Sung, MyQuietSpotUpdated 5 min read

This post contains paid links: we may earn a commission if you buy through them, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases.

Most things that look alarming on a sourdough starter aren't mold. Liquid on top, a gray skin, a white film or crusty bits stuck to the jar are common in a starter that's been left a while. Real mold is less common, and when it does show up, the answer is simple: throw the starter out.

This guide is about what you can see. If something smells wrong, our guide to what your starter's smell means covers that, and liquid on top has its own guide.

The 30-second check

What you see What it usually is What to do
Fuzzy spots, any color (white, green, blue, black) Mold Throw it all out
Pink or orange tint or streaks Bad bacteria Throw it all out
Flat, smooth white film or clumps on the liquid Harmless yeast Pour off or stir in, then feed
Gray, dry skin on top Dried starter Peel it off, feed what's underneath
Clear, gray, brown or black liquid Hooch (hunger) Pour off or stir in, then feed
Crusty, dry bits on the jar walls Dried starter Move the starter to a clean jar

Signs it's mold

Mold on a starter is raised and fuzzy, like the mold on old bread. It sits on the surface or on starter that's dried onto the jar, and it can be white, green, blue or black.

Colorado State University Extension says a starter with any sign of mold, colored or fuzzy, should not be used. King Arthur Baking's advice on color is just as clear: anything outside cream or amber, "in the pink/blue/green/orange spectrum", means throw it out. A pink or orange tint or streak anywhere in the starter falls in that range too, even without fuzz.

Things that look like mold but aren't

A white film or white clumps. A starter that sits in the fridge between feedings can grow whitish clumps on the liquid on top. Colorado State says these are safe yeasts, not mold. The difference is texture: yeast is flat and smooth, mold is raised and fuzzy. Pour off the liquid or stir it in, and feed.

A gray, dry skin. Leave a starter long enough and the top dries into a gray skin or crust. King Arthur Baking's advice is to peel off the skin and throw it away; underneath you'll find a very hungry, cream-colored starter. Feed it.

Liquid on top. Hooch is a sign of hunger, not spoilage. It can be clear, gray, brown or black, and King Arthur says the darker colors come from sitting longer, not from mold. It's only a warning sign if it's pink or orange.

Crusty bits on the jar. Starter that splashes onto the walls dries into flakes and crust. It isn't mold, but it's where you're most likely to spot something fuzzy later, so it's worth dealing with (see below).

On the jar walls, not in the starter

Fuzz on dried starter stuck to the inside of the jar is still mold in your starter's container. We wouldn't try to save the starter underneath. Spores you can't see may already be in it, and a fresh starter usually takes one to two weeks to make, sometimes longer. If the walls only have dry, crusty starter with no fuzz and no color, that's not mold: move the starter to a clean jar and keep feeding.

Why you can't just scrape it off

It's tempting to spoon off the top and keep going, especially with a starter you've had for years. Don't. The USDA explains that in soft, moist foods, mold can grow below the surface where you can't see it. A starter is about as soft and moist as food gets. Colorado State, King Arthur and University of Illinois Extension all say to throw a moldy starter out, not trim it.

Don't taste a starter to check it, either. Colorado State's advice is not to taste raw starter at all.

Starting over: clean the jar first

If it was mold, throw out all the starter and wash the jar well before you use it again. Colorado State says to clean and rinse the container thoroughly before starting over. Hot, soapy water and a scrub of the walls, rim and lid, then a good rinse, does the job. If the jar has scratches or a rubber seal that won't come clean, a new jar costs less than a lost week.

Then follow our day-by-day guide to making a starter. It usually takes one to two weeks, sometimes longer.

How to keep mold away

  • Scrape the walls down after each feeding, so starter doesn't dry on the glass.
  • Move it to a clean jar every so often, especially once the walls are crusty.
  • Feed it on schedule. A starter that's fed regularly stays active. Most mold stories start with a jar forgotten at the back of the fridge.
  • Cover it loosely. Colorado State recommends a loose cover; a lid resting on top keeps dust out without trapping gas.

When you still can't tell

Sometimes a patch looks halfway between flat and fuzzy, or a color is hard to judge in kitchen light. If you're unsure, throwing it out is the safe choice. A new starter costs a week, not your health.

We make an app, Sourdough Starter Tracker, with an AI photo checkup: two photos and two quick questions, and it tells you what it sees, including when it suspects mold. Treat it as a second opinion, not a verdict. It can't smell the jar or see below the surface, so if you're still unsure, throw it out. The first checkup is free.

Sources

FAQ

Can I scoop the mold off my starter and keep the rest?

No. Colorado State University Extension says a starter with any sign of mold, colored or fuzzy, should not be used, and King Arthur Baking says pink, orange, blue or green colors mean throw it out. Mold can reach further into a soft, wet food than you can see, so scraping the top doesn't make it safe.

Is a white film on my starter mold?

Usually not, if it's flat and smooth. Colorado State says whitish clumps on the liquid of a fridge starter that isn't fed often are safe yeasts. Mold is raised and fuzzy. If the white patch is fuzzy, or you can't tell, throw the starter out.

Is the gray skin on top of an old starter mold?

No. A gray, dry skin is starter that dried out on top. King Arthur Baking says to peel it off and throw it away; the starter underneath is fine to feed.

Does baking kill mold in a starter?

Don't rely on it. Baking kills bacteria, but moldy starter shouldn't be used at all. Throw it out and start over in a clean jar.

Related

← All blog